New Features and Enhancements:
- Support for WAC6500 Series 802.11ac Unified Pro Access Point
- MyZyXEL.com 2.0 support for NXC2500
- Support for ZyXEL one network (ZON) utility
- ZyXEL AP Flex Support for WAC6500 series, NWA5120 series and NWA5301-NJ
- Dual Firmware Image Support
- Firmware Upgrade Mechanism Enhancement with FTP Support via CAPWAP
- AP Group Setting Support
- Captive Portal with QR Code Support
- Management Frame Protection 802.11w Support
- Load Balancing Enhancement Plus Smart Class mode Support.
- LED Suppression Support
- Dynamic Channel Selection (DCS) Enhancement
- IEEE 802.1x Authentication Enhancement
- Client Band Steering Improvement
- ZyMesh Enhancement
- Selectable Regulatory Domain
- Station Signal Threshold Value Change
- Remove “WPA” from Security Profile due to Regulatory Requirement
- Output Power Unit Update
Resolved Issues:
- The jpg files can’t be showed up when click “preview” button. Preview can't show properly. The jpg files can't be showed up but only text on preview from Configuration > Captive Portal > login page > Use uploaded file > preview
- If setting address group in source field, NXC fails to redirect the captive portal page.
- Symptom: User idle timeout cannot work correctly.
- Changing any wireless profile on controller, sometimes device will be hung.
- Administrator in the WAN side of USG cannot access the controller via USG port forwarding setting.
- AP sometimes crashes.
- Controller’s configuration is damaged after creating DSCP setting.
- Cannot logout admin account successfully.
- When enabling Band Select, it will require more time for wireless 2.4GHz-capable only client to associate to SSID successfully.
- No beacon on channel 1 and 2 for NWA5121-N.
- Sometimes rate limit cannot work correctly.
- Sometimes NWA3000-N series CPU usage is 100% if enable DCS.
- When set up the RSSI threshold with more stringent (-68dBm ~ -75dBm), will cause the client can’t connect with AP.
- Use specific wireless client, like LG L9 smartphone to fast connect managed AP, it will cause GUI display error.
Comments not found