This package provides the necessary installation files of Sealife ReefMaster Mini SL320 Camera Firmware version 1.00.013PI.
Installation steps:
1. Download the firmware file.
2. Copy and paste the FWDS6065.BIN firmware file to your memory card.
3. Insert the memory card into the camera.
4. Power on the camera
5. The green camera-ready light will be lit and the LCD monitor will be black for about 10 seconds while the firmware is being automatically installed to the camera.
6. The camera LCD monitor will display the SeaLife logo and power on automatically.
7. The firmware should now be installed on the camera.
Important notice:
- If you are installing firmware to correct a slow start-up issue, you must use another memory card which is not corrupt. The firmware will not upload to the camera if you are using the corrupt card which causes the slow start-up problem. Either use another SD memory card [which is not corrupt] or format the corrupted card with another camera, SD card device or with your computer’s formatting tool.
- Download or delete all images on your SD memory card before starting the installation procedure because the images will be erased.
- Install new or freshly charged AA batteries before starting.
About Digital Camera Firmware:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Comments not found