This package provides the necessary installation files of Sealife DC800 Camera Firmware version 1.2.08.
Fixes:
- Fixes a bug which may cause the inner camera’s flash to misfire when in Ext Flash Manual mode.
Installation steps:
1. Download the firmware file.
2. Copy and paste the DS8460M.bin firmware file to your memory card.
3. Insert the memory card into the camera.
4. Push and hold the camera’s shutter button while turning the camera power on.
5. When the red light on front of the camera starts blinking, release the shutter and power buttons.
6. The firmware is now uploading to the camera. This will take about 10 seconds.
7. When the red LED light [located next to the lens] stops blinking the firmware upload is complete. Turn the camera power off.
8. Delete the firmware file from your memory card.
9. Your camera is now updated and ready to use. Enjoy!
About Digital Camera Firmware:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Comments not found