Bug Fixes from Release 10.0.0.44:
- Unable to enable routing on VLAN 1 from GUI
- SNTP synchronized time is truncated, when show sysinfo by CLI
- Stop offering IP address when there are many DHCP IP conflicts in DHCP pool
- Switch crashed when issue 'Show vlan private-vlan'
- All of ports became 'detach' after remove one rule in ACL
- M5300-28/52G-POE+ cannot provide power to PD with RPS5412
- Switch keep printing Power Supply Alarm& Alerts with RPS5412 in specific scenario
- Connection via AX745 didn't not come UP after switch rebooted
- Unable to upload license if license name contains invalid character
- Unable to configure DHCP pool option 42
- Should not allow switch to create a script name with space
- Command {deny | permit} (IPACL) does not have rule(order) ID
- Can't block switch's TFTP service via Management ACL
- Cannot change AUTO VoIP VLAN ID 2 to other VLAN ID
- Increase the characters usable for the username e-mail alert
- Static network address is reset as soon as change the ip address on interface from none to DHCP mode
- The port numbers are missing at the bottom on device view
- M5300 rebooted after enable TLS for email alert
- LED of fiber port remains light up after fiber is removed
- GUI response is very slow and unstable when https is enabled
- Memory leak when walked on IfMib counters
- When a RPS5412 is plugged into a live switch (already powered up), PD device may not get power
- Switch might crash when autoVOIP and Voice VLAN are used at the same time
Comments not found