Instructions for upgrading IV-3500STBII firmware:
- Save and extract the downloadable archive.
- Copy “flash.bin and usb_upgrade_all_flash.bin” to flash drive.
- Insert Flash drive to converter box.
- Press “MENU” on the remote Select “SYSTEM”Go to Software Update Select “usb_upgrade_all_flash.bin”Upgrading will show, after finish installing.
- Select “MENU” again go to “SYSTEM”Select “Restore Factory Default” it needs to reset the box to be able to work.
Important Note:
- These will Only work for the 3500STBII without CH 3-4 Switch and with 1309 as the first four digits of the Serial Number (SN).
About Firmware Updates:
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.
Comments not found