Fixes:
- Corrects a phenomenon in which when using the camera with the EF-S 18-135mm f/3.5-5.6 IS USM or EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.
Installation steps:
1. Download the .zip file and extract it.
2. Copy the .FIR firmware file to a SD card that has been formatted in the camera.
3. Rotate the Mode Dial to select <P> mode (or one of the other modes in creative zone).
4. Insert the SD card with the firmware into the camera.
5. Turn the Power Switch <ON>, and then press <MENU> button to display the menu.
6. Press the Cross keys to select the "Firmware Ver.x.x.x" item and then press the <SET> button.
7. The firmware update screen will appear. Press the Cross keys to select [OK] and then press the <SET button>. Follow the procedure from Step (3) onward.
About Digital Camera Firmware:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Comments not found