Major functions updated with V2.4
- Recording format is added
You can select “HD/SD Auto” for the proxy file recording format. You can select on “Settings” > “Proxy Format” > “Size.”
Notes
While “HD/SD Auto” is set, the format is set automatically by the
- signal that is input from the SDI IN connector. Proxy recording is not available when the SDI input signal is 23.98PsF. The proxy file recorded with “HD/SD Auto” may not be played
- back with the Web browser and Content Browser Mobile. Insert the SD card with the proxy file recorded to the computer directly to play back.
- Streaming Format is added
You can select a lower bit rate format.
You can select the following format via “Settings” > “Streaming Format” > “Preset.”
“Size” 480 × 270: “Bit Rate” 0.3 Mbps(Mono L)/0.3 Mbps(Mono R)
“Size” 480 × 270: “Bit Rate” 0.2 Mbps(Mono L)/0.2 Mbps(Mono R)
“Size” 320 × 180: “Bit Rate” 0.2 Mbps(Mono L)/0.2 Mbps(Mono R)
Note
- In this case, the video framerate is 10fps, and the audio sampling frequency is 48 kHz and Audio bitrate is 56 kbps for Mono.
About Device Firmware:
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.
Comments not found