Fixed Issues:
- Fixed the issue where device view does not work with after updating to Java JRE 7u51 (1.7.0_51-b13) or newer versions on the host computer
- Fixed the issue where cannot configure recurring summer time setting for Australia
Known issues:
- [Green Ethernet] 10G Copper port will link down when working at 1 G mode and enable green ethernet EEE mode. Workaround: Enable the EEE mode on other part of the link.
- RPS/AC hot swap sometimes (quickly unplug/plug) does not take effect after plug back APS1000W power cord. Workaround: re-plug the APS1000W power cord slowly.
- L3 forwarding failed when S3300 connects M5300 through redundancy dynamic LAG. Workaround: Disable LACP and use static LAG instead.
- CPU traffic will be impacted when DHCP persistent configuration backup to remote TFTP server. Workaround: To use ‘Local’ backup mode instead of ‘Remote’.
- Crash log file uploaded through TFTP protocol is incomplete. Workaround: Use HTTP to upload the crash log.
- Console hang happens in S3300 device, if we press the reset button repeatedly during reload. Workaround: Power cycle the switch. Customer needs to be cautious not to press reset button multiple times during boot stage.
About Switch Firmware:
Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.
Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.
Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.
It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.
That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.
Comments not found