CPU:
- Intel Socket 1155 for 2nd Generation Processors
- Supports Intel 32 nm CPU
Chipset:
- Intel H61(B3)
Memory:
- 2 x DIMM, Max. 16GB, DDR3 1333/1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
Graphics:
- Integrated Graphics Processor
- Multi-VGA output support: DVI/RGB ports
- Supports DVI with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 2048 x 1536 @ 75 Hz
- Maximum shared memory of 1748 MB
Expansion Slots:
- 1 x PCIe 2.0 x16
Storage:
- Intel H61(B3) chipset: 4 x SATA 3Gb/s port(s), blue
LAN:
- Realtek 8111E, 1 x Gigabit LAN Controller(s)
Audio:
- VIA VT1708S 8-Channel High Definition Audio CODEC
- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
USB Ports:
- Built-in Controller: 8 x USB 2.0 port(s) (4 at back panel, black, 4 at mid-board)
Back I/O Ports:
- 1 x PS/2 keyboard (purple)
- 1 x PS/2 mouse (green)
- 1 x DVI-D
- 1 x D-Sub
- 1 x LAN (RJ45) port(s)
- 4 x USB 2.0
- 3 x Audio jack(s)
Internal I/O Ports:
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 4 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s)
- 1 x Chassis Fan connector(s)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x Internal speaker connector(s)
- 1 x Clear CMOS jumper(s)
Form Factor:
- Mini ITX Form Factor
- 6.7 inch x 6.7 inch ( 17 cm x 17 cm )
About Sound Card Drivers:
Usually, Windows operating systems apply a generic audio driver that allows computers to recognize the sound card component and make use of its basic functions.
When enabled by proper files, the characteristics of the sound card (like model, manufacturer, number of channels) are completely available to computers, and all its features are made accessible.
Updating the audio version can improve sound quality, resolve different compatibility issues, fix related errors spotted throughout the product’s usage, add support for new operating systems, and bring various other changes.
As for applying this package, the steps are quite simple since each producer intends to uncomplicate things for users: just download the package, run the setup, and follow the on-screen instructions.
Bear in mind that, even though other operating systems might be compatible as well, it is not recommend that you apply any software on platforms other than the specified ones. Also, when the installation has finished, do perform a restart to ensure that all changes take effect properly.
Therefore, if you wish to install this audio version, click the download button and apply the package. Remember to check with our website as often as possible to stay “updated one minute ago.”
Comments not found