This update contains two different applications that can be used together or individually:
- WirelessLAN Setup Utility Version 2.2.4: Used to configure the PCWA-A100 and PCWA-A200 Access Point with the PCWA-C100, a computer with the Wireless LAN chipset built-in or with other Wireless LAN PC cards such as the PCWA-C150S or PCWA-C700. NOTE: If you are not using PCWA-A100 or PCWA-A200 as the Access Point, then the WirelessLAN Setup Utility is not needed.
- Wireless Palette: Used to establish a connection between the PCWA-C100 Wireless Client and the PCWA-A100 or PCWA-A200. NOTE: If you are not using the PCWA-C100 as the Wireless card, then the Wireless Palette software is not needed.
About Access Point Firmware:
If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.
Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.
It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.
With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.
Comments not found