Fixes:
- Modified the issue that when used on A99, flash can’t be triggered after adjusting ISO through a cycle.
- Modified the issue that when used on A57, F60 does not fire by pressing the test button on TCU while the camera is in sleep mode.
- Modified the issue that Odin TCU can’t turn off the group using Strato II.
- Test Button and Light Meters: Pressing the Test button on the transmitter will cause the flashes in A, B and C groups to fire simultaneously. Group(s) turned off will not fire.
Notes:
- When the flashes in A, B and C groups are set to Manual (M) mode, pressing the Test button on the transmitter will cause the flashes (which are powered on and on the same channel as the transmitter) to fire an initial low-power pre-flash.
- The flashes will fire simultaneously at their set manual power levels 2.5s later.
- This feature allows for light meters to be used correctly.
Comments not found