New Features and Enhancements
- Supports NAT loopback feature.
- Supports HDD more than 3TB size which is in HFS+ file system.
Bug Fixes
- Updated 2.4GHz and 5GHz wireless driver to fix the wireless connection unstable issue.
- Fixed the issue where Dynamic QoS record disappears.
- Fixed the issue where user can’t access ReadySHARE USB drive for password protected shares.
- Fixed the issue where user can’t reserve an IP address outside the DHCP pool.
- Fixed the security issue related to ReadySHARE Print function.
- Fixed the issue where user can’t work with iTunes Server 12.1 version.
- Fixed the issue where "Turn off wireless signal by schedule" is not working when the "Automatically adjust for daylight savings time" option is checked.
Known issues & bugs & Limitation:
- With regards to Apple's Time Machine backup function, Nighthawk X4 R7500 Router only supports NTFS, EXT4, EXT3, EXT2, HFS+ in Journal, HFS+ in non-journal file system. R7500 does not support FAT16, FAT32 file format for Apple Time machine backup at the moment.
- R7500 support maximum backup file size up to 500GByte now.
Firmware Upgrade Instructions:
- Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
- Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
- Download and extract the new firmware to a convenient place such as your desktop.
- Log in to the router using a Web browser.
- Click ADVANCED tab > Administration > Firmware Upgrade.
- Click Browse and find the file you just downloaded.
- Click Upload. Do not interrupt the upgrade while the router does this step.
Important Note:
- The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
- If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color.
- Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.
About Router Firmware:
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.
Comments not found