HPQ Nx6325 utility is aprogram to "cure" 2 problems with this type of notebook.
1. The first is the maximum supported memory speed is DDR2 666Mhz (333Mhz real clock), however as we know on athlon64 systems the memory support is depends on the processor. Sempron, Turion, Turionx2 processors that support DDR2 supports DDR2 800Mhz too. The memory speed is determined by applying a divisor on the CPU clock. Up until 1600 Mhz the divisor is 5, but above that is 6. So on 1800 Mhz the real memory speed is only 600Mhz! If you have a 800Mhz memory modul CPU/5 720 Mhz would be more ideal. The same is true for 2000Mhz (exactly 800Mhz memory speed). Warning! Only apply this setting when the cpu is on a lower operating frequency (say the default power saving 800Mhz or a custom set clock up to 1600Mhz). After you apply the setting you can switch to maximum CPU clock.
Anyway this tweak is not Nx6325 specific, all the above mentioned processors on any notebook systems can be tweaked by this method.
2. The second is a bug which occurs after the notebook wakes up from standby. The default Texas memory flash reader misteriously becomes a trivial SD card reader and read speed is surprisingly slow. This setting cures this bug.
Requirements:
HPQ Nx6325
Comments not found