This package provides the necessary installation files of Extron TouchLink TLP 700TV Touchpanel Firmware version 1.05.
Fixes:
- Added TLP 710CV, TLP 710MV and TLP 710TV support – New TouchLink touchpanels, TLP 710CV, TLP 710MV and TLP 710TV have been added to firmware support.
- Added submit and cancel buttons to the default web page for improved user experience. Submit and cancel buttons have been added to the default web page to enhance user experience on changed values for touchpanel settings.
- Improved sleep timer. Sleep timer changed from seconds to minutes.
- Improved inactivity timer base on side button presses and touchscreen activities. Inactivity timer can be configured base on side button presses and touchscreen activities.
- Corrected issue of screen staying ON when power cycling while lid is closed. When power cycled on cable cubby TouchLink touchpanels with the lid down (closed), the screen will now turn off after the initializing process.
- Corrected the issue of sleep timer value going to 000 after entering IP address in touchpanel menu. With this correction sleep timer will not go to 000 after entering a valid IP address.
Installation steps:
1. Power on a computer that is connected to the same network as the Touchpanel.
2. Download the firmware .exe file for the touchpanel and run it to extract the firmware.
3. Open your browser and type the IP address of the touchpane; unit into the address box. The
browser opens the TouchLink panel web pages.
4. Click the Configuration tab at the top of the page
5. Select Firmware Upgrade from the bar on the left.
6. Use the Browse button to navigate to and select the firmware file that was saved in step 2.
7. Click Upload. The Touchpanel screen shows the message Firmware Uploading... Please Wait... . When the firmware is uploaded, the screen shows the message Restarting... . Once the firmware is installed, the panel can be calibrated using the on-screen menus or the TouchLink panel web pages.
About Touchpanel Firmware:
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.
Comments not found