This package provides the installation files for ContourPlus Action Camera Firmware.
CONTOUR + INSTALLATION WITHOUT STORYTELLER
In some situations, it may be necessary to manually update the firmware without the assistance of Storyteller. Here are the steps to manually update the firmware:
1. Format the microSD Storage Card before beginning any firmware update.
2. Download the Contour+ firmware to your desktop.
3. Double click on the .zip file you just downloaded to uncompress the firmware file.
4. Plug the Contour+ camera into your computer using a USB cable. Check to see that the Record slider is not in the forward (or ON) position. Once connected, the Battery LED on the Contour+ will turn red and the camera will appear as an external USB device on your computer.
5. On your computer, navigate to the camera which is mounted as an external storage device.
6. Copy the ContourPlus.bin file that you downloaded in Step 2 to the camera's microSD card. Do not put it in any subfolders on the camera's microSD card.
7. Unplug the camera from your computer. It you are using a Mac, don't forget to unmount (eject) the camera before unplugging it.
8. With the camera disconnected from the computer and powered off, press and HOLD the Bluetooth button on the camera.
9. Keeping the Bluetooth button pressed, power on the camera by pressing and releasing the power button. Do not keep holding the power button.
10. The lights on the back of the camera will flash. When the battery and microSD card lights begin to flash red alternately, then you may release the Bluetooth button. Do not release the button before this step.
11. IMPORTANT: Interrupting the update process by removing the battery while the lights are still flashing can permanently damage your camera.
12. The lights on the camera will flash for a few more seconds and then the camera will power itself off.
13. Turn the camera on using the power button. After the lights on the back go out, power the camera off.
14. Reformat the microSD card follow the instructions from Step 1.
About Digital Camera Firmware:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Comments not found