New features:
- Now supports AiProtection/ Parental Control App & Webs filter features with signature update mechanism.
- Support Dual WAN Failover Guest Network control feature(WAN > Dual WAN > Guest Network Terminate Switch).
- Now supports Access Log feature, display client info(IP, MAC, Hostname, Connection started/ finished time) with auto-backup to USB function.
- Support DOMAINS.GOOGLE.COM DDNS Service.
- Support URL Filter for Guest Network.
- Support auto-detect Germany ISP Deutsche Telekom: BNG service for IPTV.
- Support allow specified IP address to access device, via SSH, Telnet or UI.
Security improvements:
- Prevent Brute Force/Dictionary attacks, now SSH/Telnet/UI would block attempted logins, 5 failed attempts leads to malicious access blocked for 5 minutes(LAN/WAN counter separated)/ with related syslog output.
- Check referrer of some web pages in GET command.
- Remove WLAN key in wps_info() for ensure security.
- Smartsync: Verifies the authenticity of the server's certificate.
- Smartsync: Set iptables rules only accept packages from local IP to smartsync port.
- Update SSH dropbear version to 2016.74/ integrate with Protection Server.
- SSH Authkeys length extended to 1023.
DSL:
- DSL driver updated - v5.5.2.7.
- DSL Log > INP display fine tune.
- Modify QIS > UK ISP BT - Infinity 2 to BT - Infinity.
- Update YouView IPTV Box settings for UK ISP Talk Talk.
- Further enhance G.INP control for UK ISP Sky Broadband.
- Support Turkey ISP Turk Telekom - Tivibu IPTV service. (thanks to the support from Tecnics / Emre Kalay)
ADSL WAN (ATM) QIS manual setting list updated:
- Add Kuwait ISP Fasttelco
- Modify Russia Бaлaшихa ISP Домолинк (0/35)
- Add Russia Бaлaшихa ISP Домолинк(35/33)
- Add Spain ISP Ocean
- Add Turkey ISP Superonline
- Add Nepal NTC
- Add Germany ISP Deutsche Telekom (VLAN ID 7)
VDSL WAN (PTM) QIS manual setting list updated:
- Add Iran ISP Shatel
- Add Australia ISP Belong
Bug fixes and Enhancements:
- Download Master updated: v3.1.0.101.
- Update AiCloud to v2.0.2.3/ fixed fail to get wan_ip in dual-wan mode.
- Fixed ATM/PTM default QoS badnwidth value display as NaN issue.
- Support swap approach once AiProtection enabled.
- OpenVPN Server: change to more secure default cipher setting.
- Fixed Guest Network > Access Intranet Disable, guest clients still could access AiCloud issue.
- Fixed possible USB Application page hang(stuck with upgrading) issue.
- Fixed USB disks mounted via hub, cannot add download task/ add the USB notify function to the programs when partitions are mounted/unmounted.
- Fixed possible no UI warning message when upgrade with invalid firmware issue.
- Fixed possible OpenVPN Server fails to work after system reboot issue.
- Fixed various UI related issues.
- Fixed possible WiFi Tx hang issue.
- Fixed NAS devices UPnP failed to work issue.
- Fixed Ethernet WAN connection problem with 802.1Q enabled.
- Fixed possible WiFi Guest Network SSID disappear issue.
- Remove option 42 in DHCP request option in non-default route WAN.
- Fixed kernel: ICV Error.
- Fixed OpenVPN Server cannot be used after system reboot.
- Fixed Samba related issue.
- OpenVPN Server support generate TLS 2048 bits certificate/key.
- Fixed WebHistory filter rule issue/ caused by ACCEPT from Network Services Filter(IP Filter) before Web History rule.
- Fixed setting such as static IP/http/https/both and port change leads to system hang(web server crash).
- Fixed some issues that may cause TigerVPN OpenVPN service fail to work.
- Fixed it is hard for client to connect to OpenVPN Server in Load Balance mode/ cannot connect to openvpn server on LAN side issues.
- Add "Auto select channel including channel 12, 13" checkbox for 2.4GHz auto channel selection.
- Fixed dnsmasq does not respond to the query from OpenVPN.
- Fixed LAN can't access Internet after terminating VPN client connection.
- Fixed tunnel 6in4 not work in bridge mode issue.
- Fixed various SmartSync/ ftpclient related issues.
Installation Procedure:
- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.
About Router Firmware:
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.
Comments not found