This package provides the necessary installation files of Allen & Heath Personal Mixer Firmware version 1.13.
Fixes:
- Keys assigned to Aux In may not always store / recall correctly in presets.
- In rare circumstances a hard reset could cause the ME-1 to stop passing audio.
- Editing the name of a USB preset could sometimes crash the ME-1.
- Several bugs related to Groups and stereo members.
- Keys set to Auto Assign mode could sometimes have their level, mute and pan reset after power up.
- Exporting a Config to USB and importing into another unit could sometimes corrupt the presets and result in unassigned keys.
- Storing many presets on a USB3.0 key could sometimes corrupt the USB data and crash the ME-1.
- Hot-plugging the dSNAKE input could sometimes reset the key assignments.
- The Aux Input left and right side were inverted.
- A key set to Auto Assign would cause the level and pan of the assigned channel to be reset if the key was reassigned to a specific source.
Installation steps:
1. Check the current version. Hold Shift and press the Group key to open the Setup Menu. Scroll and select About. The screen displays the firmware version currently loaded in the ME-1.
2. Download the firmware. This is a zip file with a name that includes the version number, for example: AllenHeathME1_V1.23-Rev12345.zip
3. Copy the new firmware to USB key. Unzip the downloaded file to your computer and then copy its ME1 folder to the root of your USB key. This will overwrite any previous version you may have on your key.
Note Unzip the downloaded file to your computer, not directly to the USB key. The ME1 folder has the following files:
- USB root
- ME1
- M0.pad 192KB
- M4.pad 128KB
- Version.txt 1KB
- Safely Remove/Eject the USB key from the computer.
4. Update the firmware.
- Plug the USB key into the ME-1 rear panel USB port.
- Hold Shift and press the Group key to open the Setup Menu. Scroll and select System Setup. Select the Firmware page. The screen displays the current firmware version and that found on the key.
- Press the Rotary to select the new firmware. Select Ok in the confirmation screen to start the update.
- The ME-1 reboots with the new firmware loaded in a few seconds
About Mixer Firmware:
Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.
However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.
As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).
This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.
Comments not found