Nikon MiniTT1 ControlTL Firmware 3.800:
- Added support for Nikon D750 (Nikon D750 Camera Firmware C 1.01)
- Added support for Nikon SB-500 Speedlight
- Fixed SpeedCycler. If SpeedCycler ever gave you issues in the past, please try it again!
D750 Operational Considerations:
- This camera will work in the ControlTL system with normal operational considerations and the additional considerations detailed below:
1) Set Custom Function e1 “Flash Sync Speed” to 1/200s (Auto FP) to work with High Speed Sync (HSS) and HyperSync in the ControlTL system.
2) This camera will only perform as expected with the ControlTL system if the camera’s battery is 60% or greater. Always make sure the camera’s battery is fully charged before use.
The following Nikon gear is now supported in this firmware release:
- D4S - C:1.10
- D4 - A:1.10
- Df - C:1.01
- D810 - C:1.02
- D800/E - A:1.10 / B:1.10
- D750 - C:1.01
- D610 - C:1.01
- And others like the D7100, D4, D600, D700, D3, D5200, etc…
IMPORTANT:
- MiniTT1/FlexTT5 for Nikon Firmware Version 3.800 addresses compatibility with newer Nikon cameras and some improvements we have made since the launch of ControlTL Firmware version 3.700.
- When updating firmware, be sure to update all of your radios to the latest version. Your radios will only operate as expected when all units are using the latest firmware.
- Previously used settings or saved profiles may not be automatically reloaded after installing new firmware. Make sure to record any important settings before loading the firmware because the PocketWizard Utility will perform a factory reset once the installation is complete and your previous settings will be overwritten.
- After updating your firmware, always perform a factory reset with the radio.
Comments not found