Timecode Systems Camera Adapter USB Firmware Updater for Mac OS

Software Screenshot:
Timecode Systems Camera Adapter USB Firmware Updater for Mac OS
Software Details:
Version: 4.4
Upload Date: 3 Nov 16
Developer: Other
Distribution Type: Freeware
Downloads: 9

Rating: 1.0/5 (Total Votes: 2)

SyncBac PRO

- The latest firmware version is: 1.21

- The latest FPGA version is: 1.06

: pulse

- The latest firmware version is: 4.04

- The latest FPGA version is: 1.11

- The latest app version is: 2.02

- V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID

: wave

- The latest firmware version is: 4.04

- The latest FPGA version is: 1.11

- The latest app version is: 2.02

- V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID

Mini trx+

- The latest firmware version is: 4.04

- The latest FPGA version is: 1.15

- V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID

Denecke TS-TCB

- The latest firmware version is: 4.04

- The latest FPGA version is: 1.11

- V4.04 Changes: Added support for SyncBac PRO and advancements to BLINK protocol including introduction of a new BLINK Master ID

Mini trx

- The latest firmware version is: 1.21

- The latest FPGA version is: 1.11

Mini rx

- The latest firmware version is: 1.21

- The latest FPGA version is: 1.11

Mini tx

- The latest firmware version is: 5.03

- The latest version of Firmware is required.

wifimaster

- The latest firmware version is: 5.30

- The latest FPGA version is: 1.30

Instructions:

- Download the updater software package for the: pulse, SyncBac PRO,: wave, mini trx+, mini trx and mini rx.

- Drag the USB Updater app into the Applications folder, as requested.

- Click on the Updater in the Applications folder. The Updater program will launch. Make sure your Mac is connected to the internet to automatically check for the latest firmware.

- A window will appear saying ‘Device not connected’. Power on your unit and plug it into your Mac USB port.

- Once the ‘Connected’ message appears in the updater program window, you will be able to see immediatley the details of your unit and whether a new firmware, FPGA or web page update is available. If prompted with a dialogue box, click OK. The new update will be programmed.

- Any further required updates will appear on screen via prompts. Once your unit is up to date the app will notify you.

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you’re properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.

Similar Software

Other Software of Developer Other

Comments to Timecode Systems Camera Adapter USB Firmware Updater for Mac OS

Comments not found
Add Comment
Turn on images!