This package provides the necessary installation files of Xtremer SideWinder 3 Firmware version 4.2.7.
New features:
- Press REC remote key to go directly into DVB-T from the Main Screen
Bugs fixed:
- Background music stopps when pressing HOME key - FIXED
- 16:9 screen ratio - FIXED
- Network Shares requesting a password on access - FIXED
- Wget command - FIXED
- Alsa binary files - FIXED
- No audio for Android games - FIXED
- MAC address - FIXED
- USB Slave connection detection - FIXED
Before starting the firmware installation process, please note the following:
- Use a USB2 thumb/pen-drive that in known to function with your Xtreamer media player. We recommend one no bigger than 2GB.
- Format the thumb/pen-drive to the FAT-32 file format system.
- Some HDMI display devices may not display an on-screen image (due to HDCP protocols). If so, please connect using the 'yellow' RCA/phono cables.
- Disconnect all external USB Wi-Fi dongles, USB hubs and USB HDD drives.
- Remove your internal HDD (if fitted).
- Disconnect RF antenna from the internal DVB-T module (if fitted).
Installation steps:
1. Un-zip/Extract the Emergency ???????.zip file. This will reveal an install.img file.
2. Copy the install.img file to the root of the USB2 thumb/pen-drive (ie: not inside a folder).
3. nsert the thumb/pen-drive into one of the rear USB ports.
4. Disconnect the power from the Xtreamer media player and wait for 30 seconds.
5. Press the power button on the front of the Xtreamer media player and keep it pressed.Re-connect the power to the Xtreamer media player - with the power button still pressed. After a few seconds the emergency upgrade process should be visible on your display device (if the procedure has been performed correctly). Now you can release the power button.
6. After the "Emergency Recovery" installation procedure has finished, the Xtreamer media player should automatically perform a RESTORE DEFAULT (which will remove all your saved pre-sets). However, it is highly recommended that you also manually perform a mandatory RESTORE DEFAULT to completethe firmware installation.
About Media Player Firmware:
Installing a firmware update for your Media Player improves the general user experience by adding new features, fixing bugs, and enhancing the compatibility of your device, in order to play various formats of audio and video content.
By updating your Media Player, you can actually prolong the device’s life because, this way, it will be in sync with the new industry standards for content creation.
However, the process of updating your device is a risky one if not done according to strict instructions, such as: make sure that the firmware you have downloaded is compatible with your device, and don’t interfere with the player during the update process.
The most common method of upgrading your Media Player is by using a USB stick or update DVD. Although this process is very straightforward, each device has certain particularities that you must take into account.
If you consider using this update for your Media Player, feel free to click the download button, install the firmware and enjoy. Check out our website as often as possible to keep your Media Player up to date with the latest software and firmware.
Comments not found