Must have Router & Switch & AP Drivers for Linksys

Fixes:- Complies with 2015 CE standard requirements - Additional security to protect unauthorized access to router log...

Fixes:- Resolved issue of lower wireless performance at channel 10~13 (2.4GHz band) for European models when the channel width is set to "20MHz only".IMPORTANT:DO NOT power cycle the Router during the firmware upgrade process. About Router...

Fixes:- Complies with 2015 CE standard...

Fixes:- Complies with 2015 CE standard requirements- Additional security to protect unauthorized access to router log files- UPnP Security fix- Wi-Fi Performance improvement for 2.4 GHz- Improvement to setup experience from iOS devices IMPORTANT:- DO NOT...

Fixes:- VLAN tagging is supported IMPORTANT:- DO NOT power down the router during the firmware upgrade process.About Router Firmware:Before you consider downloading this firmware, go to the system information page of the router and make sure that the...

Release log: - Compliant with 2015 CE EN300328 and EN301893 standards. - Additional security to protect unauthorized access to router log files. - Integration of BSP 6.37.14.62. - Updated libupnp to v1.6 to address a security vulnerability. About Router...

Fixes:- Compliant with 2015 CE EN300328 and EN301893 standards- Additional security to protect unauthorized access to router log files About Router Firmware:Before you consider downloading this firmware, go to the system information page of the...

Changes: - Complied with CE RED - Addressed IOActive Security Issues - Enlarged the default number of concurrent NAT sessions - Fixed WPS LED blinking when WPS connection is failed or overlapped. - Fixed Wireless Bridge/Repeater cannot connect to upstream...

Fixes:- Modified the auto channel selection (ACS) for 2.4GHzIMPORTANT:- DO NOT power cycle the Router during the firmware upgrade process. - Your router must have an Internet connection prior to upgrading your firmware. If you receive an “Invalid...

Fixes:- Modified the auto channel selection (ACS) for 2.4GHzIMPORTANT:- DO NOT power cycle the Router during the firmware upgrade process. - Your router must have an Internet connection prior to upgrading your firmware. If you receive an...