Nikon D3300 Camera Firmware

Software Screenshot:
Nikon D3300 Camera Firmware
Software Details:
Version: 1.01
Upload Date: 11 Feb 16
Developer: Nikon
Distribution Type: Freeware
Downloads: 279
Size: 20853 Kb

Rating: nan/5 (Total Votes: 0)

Changes:

- AF-P DX NIKKOR 18–55 mm f/3.5–5.6G VR and AF-P DX NIKKOR 18–55 mm f/3.5–5.6G lenses are now supported. Vibration reduction can be enabled or disabled using the new Optical VR option in the photo SHOOTING MENU, which is displayed when an AF-P DX NIKKOR 18–55 mm f/3.5–5.6G VR lens is attached.

The following issues have been addressed:

- Turning Auto info display off had no effect at focal lengths over 55 mm.
- Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.

Viewing the Camera Firmware Version:

- Turn the camera on.
- Press the camera MENU button and select Firmware version in the SETUP MENU to display the camera firmware version.
- Check the camera firmware version.
- Turn the camera off.

Updating the Camera Firmware:

- Create a folder on the computer hard disk and name it as desired.
- Download the firmware file to the folder created.
- Run it to extract the following file to a folder named “D3300Update”
- Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
- Insert the memory card into the camera memory card slot and turn the camera on.
- Select Firmware version in the SETUP MENU and follow the on-screen instructions to complete the firmware update.
- Once the update is complete, turn the camera off and remove the memory card.
- Confirm that the firmware has been updated to the new version.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

Supported Operation Systems

Similar Software

Other Software of Developer Nikon

Comments to Nikon D3300 Camera Firmware

Comments not found
Add Comment
Turn on images!