Amcrest ATC-1202W Camera Firmware UN

Software Screenshot:
Amcrest ATC-1202W Camera Firmware UN
Software Details:
Version: 3.6.05
Upload Date: 21 Apr 16
Developer: Amcrest
Distribution Type: Freeware
Downloads: 121
Size: 1014 Kb

Rating: nan/5 (Total Votes: 0)

The package provides the installation files for Amcrest ATC-1202W Camera Firmware version UN 3.6.05.

Features:

- 12 Megapixel
- 1080p High Definition Video
- Wireless (SMS) feature allows you to remotely send texts to take photos, take and receive those photos to your phone, check the picture quantity and battery status, turn on, and put the camera in sleep mode.
- 36 IR LEDs for Night Vision up to 20m(65 ft)
- microSD Card 8MB ~ 32GB *SIM card capability*
- IR Triggers for Fast-Action Snapshots and Recording
- 2.0 Inch LCD Display
- Battery or DC Powered 

Please follow these instructions to update the firmware.

1. Copy the FW18NA.bin file to a SD card.
2. Insert the card into the camera.
3. Turn on the camera to Test mode.
4. The camera will automatically read the SD card and start the update. While the camera is updating, the screen will be black. Do not remove the power supply or turn it off as this will cause the update to fail.
5. Once the update has finished the screen will turn on.
6. Turn off the camera, remove the FW18NA.bin file from the card, then reinsert it.

Your camera has now been successfully updated.

Change Log:

1. Enable you to view the IMEI number of the camera in the Test mode by pressing the left arrow on the remote.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

Similar Software

Other Software of Developer Amcrest

Comments to Amcrest ATC-1202W Camera Firmware UN

Comments not found
Add Comment
Turn on images!