ENHANCEMENT:
- Added support for Spanish, French, and Chinese on the web UI->Call Features Settings page under
- all 4 profiles
- Added support for deleting core files from web UI
- Added improvement for inter-port and far end echo issue
- Added ability to upload device configuration file directly from the web UI
- Added busy tone when using current disconnect
- Added Germany to "Country specific deployment" list
- Added option to disable PnP SUBSCRIBE feature
- Added security improvement: Hide passwords from command line
- Added reboot timer feature
- Added web UI option to configure local RTP port
- Added option to hide IP address from LCD
- Added DHCP option 42 and DHCP option 2 support
- Added option to enable/disable Crypto life time when using SRTP
- Added configurable option to enable/disable Broadsoft Connected Line ID
- Added ability to customize dial tone when user does not enter any digit
BUG FIXES:
- Fixed TX/RX low gain
- Fixed reboot device by unplugging network cable causes incoming IP call fail to establish
- Fixed GXW4248 has low audio gain and echo introduction compared to other GXW42xx models
- Fixed Number is lost in outgoing call
- Fixed web UI displays XXXXX
- Fixed crash issue with core voltage
- Fixed can retrieve any configuration value without authentication
- Fixed make a call with DUT and then DUT hangs up, another gateway device would hear echo 1s
- before busy tone
- Fixed when the third party is HT802 and the Vocoder is PCMA, no voice can be heard
- Fixed no prompt can be heard when HTTPS is selected via IVR
- Fixed DUT should change the IP on the LED once it gets a new one
- Fixed the copyright time on telnet is not consistent with the one on web UI
- Fixed all ports suddenly stops working
- Fixed the port doesn’t work after the phone holds many times
- Fixed DUT does not prompt that “Device not registered” via IVR in Chinese
- Fixed SIP Registration Failure Retry Wait Time is fixed in 20 minutes when receiving 403 Forbidden
- Fixed attended transfer failure
- Fixed SIP NOTIFY with "check-sync;reboot=false" event should not reboot the gateway
- Fixed device loses the ring tone cadence configuration after reboot
- Fixed NAPTR/SRV configuration is not applied on the fly unless reboot
- Fixed incoming call following attended transfer by Netsapiens Proxy is automatically terminated by the
- device
- Fixed gateway cannot be provisioned using zero config if the UCM binds different port from 5060
- Fixed timezone selection does not include DST definition
- Fixed cannot perform a second call after making transfer between two ports registered with the same
- extension
- Fixed devices fail to re-register if/when SIP realm is changed
- Fixed some P values cannot be blocked using P9999
- Fixed DUT will not send out SUBSCRIBE request after enable 3CX Auto Provision
- Fixed hunting group on fly change has logic flaw
- Fixed attended transfer sometimes fails
About VoIP System Updates:
Firmware updates for VoIP Systems are very complex and usually contain many bug fixes, security improvements and compatibility enhancements, because the base system must be able to connect to webcams, video conference devices and the like.
Upgrading your VoIP System firmware should be done as often as possible to keep your device up to date with new security standards, and improve the native plug and play capabilities of your device.
Although beta firmware are usually full of new and exciting features, updating to them should only be done after thoroughly reading the changelog and making sure that you still retain phone functionality. Remember to check if you can revert to a more stable version as well, in case the new update is not what you were expecting.
If you intend to apply this update, please make sure that the package is compatible with your VoIP System, hit the download button, follow the installation instructions and enjoy. Check out our website as often as possible in order to keep your device “Updated one minute ago.”
Comments not found