TP-Link TD-W8961ND V3 Router Firmware

Software Screenshot:
TP-Link TD-W8961ND V3 Router Firmware
Software Details:
Version: 120830_FI
Upload Date: 22 Apr 16
Developer: TP-Link
Distribution Type: Freeware
Downloads: 1499

Rating: 5.0/5 (Total Votes: 1)

300Mbps Wireless N ADSL2+ Modem Router

- ADSL 2/2+ Modem, Wireless N Access Point and 4-Port Router, in a single device
- Wireless N speed up to 300Mbps makes it ideal for heavy bandwidth consuming or interruption sensitive applications like online gaming, Internet calls and even HD video streaming
- Easy Setup Assistant with multi-language support provides quick & hassle-free installation
- Easy one-touch wireless security encryption with the"WPS" button and Easy Wi-Fi On/Off button

Modifications and Bug Fixes:

- The PVC which can get WAN IP will be set as default route for Internet;
- Pre-configure 3 PVCs:a. 0/100, Dynamic IP;b. 0/33, Dynamic IP;c. 0/35, Dynamic IP;
- LAN Multicast = IGMP V2;
- Disable all WAN services;
- WLAN is pre-secured and the password is the PIN;
- Default Wireless Area: Finland,Time Zone: GMT+02:00;
- CLI command sets ip igmp proxy 1 as default.

Notes:

- Special firmware only for Finland customers

How to upgrade TP-LINK ADSL Modem Router

Step 1: Log into the ADSL Modem Router by typing http://192.168.1.1 in the address bar of the web browser. The User Name and Password are both admin unless you have changed it before.
Step 2: Click System Tools ->Firmware Upgrade, click the Browse button to choose the firmware you already extracted in the folder.
Step 3: Click the Upgrade button. The device will reboot automatically after the upgrading has been finished. Please wait about 3 minutes.
Step 4: Click Status, verify that the router’s firmware has been upgraded.
Step 5: It is recommended that restoring the device to factory default to make the new functions take effect; Click System Tool->Factory Default, Click Restore Button.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device. 

Similar Software

Other Software of Developer TP-Link

Comments to TP-Link TD-W8961ND V3 Router Firmware

Comments not found
Add Comment
Turn on images!