Improved functions
- Improved Pandora Function. (North American/ Oceania sales area only)
- Improved reception performance of Tuner.
- Improved stability.
Firmware Update Procedure
1. Connect the updater media to the CD/USB receiver.
2. When an audio file is played or “NO MUSIC” is displayed, press the [SRC] button and select “STANDBY” (standby state).
3. Press the [VOL] knob to enter the function mode. “FUNCTION” is displayed. 4. Turn the [VOL] knob to display “SYSTEM”, and press the [VOL] knob.
5. Turn the [VOL] knob to display “F/W UPDATE”, and press the [VOL] knob.
6. Turn the [VOL] knob to display “UPDATE SYSTEM”, and press the [VOL] knob.
7. Press the [VOL] knob again.
8. Turn the [VOL] knob to display “YES”, and press the [VOL] knob. “FILE CHECK” is displayed.
Caution: The screen may go blank for a few seconds. Do not unplug the USB memory or Power Off the unit during the Update Procedure. Update starts with “UPDATING” displayed. Update should finish in approximately 5 minutes and “COMPLETED” is displayed upon completion.
9. The receiver reboots automatically. Update on the firmware takes effect.
10. Check that the firmware version is updated, by referring to “Checking the Firmware Version
CD/USB Receiver Firmware utility is a program to improve the function of CD/USB receiver has been released.
Model group A:
KDC-100UA
KDC-100UB
KDC-100UBS
KDC-100UG
KDC-100UR
KDC-100UW
KDC-1010U
KDC-10UR
KDC-115U
KDC-125U
KDC-150RY
KDC-151UBM
KDC-161URM
KDC-165U
KDC-181UWM
KDC-200UB
KDC-MP165U
KDC-MP2065U
Model group B:
KDC-265U
KDC-200UV
KDC-265U KDC-200UV-265U KDC-200UV
Comments not found