This package provides the necessary installation files of Extron DTP CrossPoint 4K Matrix Switcher Firmware version 1.02.0002.
Fixes:
- Added support for the DTP CrossPoint 86 4K model.
- Fixed the issue with DSP Configuration losing its setting after a power cycle. The DTP CrossPoint 108 4k will not retain its DSP configuration after power cycling
Installation steps:
1. Download the firmware file.
2. Run the .exe file. This opens the Firmware Update program, creating a product named folder within which is placed the firmware file (x.S19).
3. Access the device internal web pages.
4. Select the Configuration tab.
5. On the Configuration page, click Firmware Upgrade on the left sidebar menu.
6. Click Browse. A Choose File window opens.
7. Navigate to the folder (created in 1g) where the firmware upgrade file is saved and select the file.
NOTES:
- Valid firmware files must have the file extension “.S19”. Any other file extension is not a firmware upgrade.
- The original factory-installed firmware is permanently available on the scaler. If the attempted firmware upload fails for any reason, the scaler automatically reverts to the factory-installed firmware.
8. Click Open .
9. Click Upload . While the firmware is uploading, the Upload button changes to “Uploading...” . When the uploading process is complete, the button changes back to Upload. The uploading may take a few minutes.
About Matrix Switcher Firmware:
Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.
On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.
When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.
As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.
Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.
Comments not found