BlackVue DR650GW-1CH Dashcam Firmware for Mac OS

Software Screenshot:
BlackVue DR650GW-1CH Dashcam Firmware for Mac OS
Software Details:
Version: 2.002 updated
Upload Date: 21 Apr 16
Developer: Blackvue
Distribution Type: Freeware
Downloads: 13
Size: 59244 Kb

Rating: nan/5 (Total Votes: 0)

Upgrade Instructions:

1. Download newest firmware file.
2. Insert the SD card you wish to use for the upgrade into the PC.
3. Format the SD card completely to delete all data from the card. (Please ensure you have backed up any footage needed.)
4. Copy the 'BlackVue' folder you have unzipped onto the SD card.
5. Insert SD card to BlackVue device and turn on the camera for upgrading firmware.
(Please do not turn off the power during the firmware upgrading and you will have message when upgrading is completed.)
CAUTION : The SD card should be formatted in FAT 32 format and BlackVue PC viewer(Windows/Mac) support proper format the SD card in FAT32 format. And 64GB SD card must be formatted on Blackvue PC viewer(Windows/Mac) for proper operation.

This version adds:

1. Stability improvements.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

Similar Software

Other Software of Developer Blackvue

Comments to BlackVue DR650GW-1CH Dashcam Firmware for Mac OS

Comments not found
Add Comment
Turn on images!