Must have Webcam & Digital Camera Drivers for Mac

Changes: - Addressed an issue that caused the memory card access lamp to light longer than normal or the message “This memory card cannot be used. Card may be damaged. Insert another card” to be displayed while the memory card was...

Changes: - AF-P DX NIKKOR 18–55 mm f/3.5–5.6G VR and AF-P DX NIKKOR 18–55 mm f/3.5–5.6G lenses are now supported. Vibration reduction can be enabled or disabled using the new Optical VR option in the photo SHOOTING MENU, which is...

Changes from “C” Firmware Version 1.10: - Commander mode can now be selected for Custom Setting e3 (Optional flash) when an optional SB-500 flash unit is attached. - The Auto and Flash white-balance options can now be used with the LED light...

Changes: - Reduced noise (horizontal lines) in movies shot with 1280×720@60p or 1280×720@50p selected for Frame size/frame rate. - Fixed an issue with the camera freezing when the Clean image sensor option was used.Viewing the Camera Firmware...

Changes: - AF-P DX NIKKOR 18–55 mm f/3.5–5.6G VR and AF-P DX NIKKOR 18–55 mm f/3.5–5.6G lenses are now supported. Vibration reduction can be enabled or disabled using the new Optical VR option in the photo SHOOTING MENU, which is...

New Features: - Improved pairing and connectivity between the camera and Android versions of the SnapBridge app. Confirming the firmware version - Turn on the camera. - Press the camera’s MENU button and select Firmware version from the setup...

  What is new in this release: When the mode dial was set to an exposure mode (P, S, A, or M) and II selected for the Color mode setting in the Custom item of the Optimize image menu, and then an option other than Custom (such as Portrait) selected...

Changes: - Reduced noise (horizontal lines) in movies shot with 1280×720@60p or 1280×720@50p selected for Frame size/frame rate. - Fixed an issue with the camera freezing when the Clean image sensor option was used. - Fixed an issue that...

Fixes: - Camera operation is now more reliable.Check Camera Firmware Version: - Turn the camera on. - Press the camera MENU button and select Firmware version in the setup menu to display the camera firmware version. - Check the camera firmware version. -...

Changes: - An External recording control option has been added to the HDMI item in the SETUP MENU. If the camera is connected via HDMI to a third-party recorder that supports the Atomos Open Protocol (the Atomos SHOGUN, NINJA2, or NINJA BLADE), selecting...