450Mbps Wireless N Router
- 450Mbps wireless speed is ideal for interruption sensitive applications like HD video streaming
- Three antennas greatly increase the wireless robustness and stability
- Easy wireless security encryption at a push of WPS button
- IP based bandwidth control allows administrators to determine how much bandwidth is allotted to each PC
NOTE: 450Mbps wireless speed is only for TL-WR941ND V6 while the earlier version is 300Mbps.
Modifications and Bug Fixes
- Improve the PPTP/L2TP perfermance;
- Improve the perfermance of VPN Passthrough;
- Add the support of IGMP;
- Add support to DHCP Option 249;
- Add the support of RTSP;
- Add the support that the WAN IP and Gateway can be in different subnet;
- Add the virtual server port transfer in second connection;
- Fix the problem that the UPNP items disappear 12 hours later;
- Fix the problem about the DDNS logon in Singapore;
- Fix a backup & restore problem;
- Standard the rule of adding static route;
- Some web page display modifications.
About Router Firmware:
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.
Comments not found