Changes:
- Corrects a phenomenon in which when using the camera with the EF 70-300mm f/4-5.6 IS II USM lens, even if lens aberration correction is set to "Enable", correction will not be applied.
Precautions:
- A power failure during the firmware writing operation may disable the camera.
- Use a fully charged Battery Pack or dedicated AC Adapter Kit (Optional) for the firmware update.
- Do not shut off the power during the firmware writing operation.
- Do not open the card slot cover during the firmware writing operation.
- Do not press any camera buttons during the firmware writing operation.
Firmware Update Procedures:
Prepare the items required to update the firmware.
- Camera body
- Dedicated Battery Pack (The battery pack must be fully charged) or dedicated AC Adapter Kit
- CF card (64MB or more, 64GB or less)
- Firmware update file.
Create the firmware update file:
- Download the zipped self-extracting file.
- Extract the downloaded file, and create the firmware update file.
Copy the firmware update file to the CF card:
- Insert a CF card that has been formatted in the Camera into the CF card reader.
- Copy the firmware update file to the first window that appears when the CF card is opened (the root directory).
- Remove the CF card from the card reader.
- When removing the CF card, be sure to do so as described in the documentation for the computer or the card reader.
- If the firmware update file is placed in subfolder of the CF card, the camera will not see it.
- Rotate the Mode Dial to select <P> mode (or any mode other than Fully-Automatic Modes).
- Insert the CF card with the firmware into the camera.
- Turn the Power Switch <ON>, and then press the <MENU> button to display the menu.
- Rotate the Main Dial and the Quick Control Dial to select the "Firmware Ver.x.x.x" item at the bottom of the “Set-up 3 (Yellow)”, and then press the <SET> button.
- The firmware update screen will appear.
- Turn the Quick Control Dial, select [OK], and then press the <SET> button.
Update the firmware:
- The screen will appear on the camera’s LCD monitor.
- If you press the <SET> button, a confirmation screen will appear, so check the firmware update shown, rotate the
- Quick Control Dial to select [OK], and press the <SET> button again to start the firmware update.
- The message will appear during the update.
- When the update is completed, the message will appear on the camera’s LCD monitor.
- Complete the firmware update by pressing the <SET> button.
- The firmware update is now completed.
- When the firmware update operations are finished, turn the camera <OFF> and remove battery from the camera for at least two seconds. This will cause the new firmware to take effect after the battery has been reloaded and the camera is turned on.
- Format the CF card before using it again.
Verifying the firmware Version:
- Turn the Power Switch <ON>, and press the <MENU> button.
- Rotate the Main Dial and the Quick Control Dial, and you will see the "Firmware Ver.X.X.X" at the end of the settings shown in “Set-up 3 (Yellow)”.
- This is the currently installed firmware version number.
About Digital Camera Updates:
Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.
On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.
It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.
This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.
When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.
However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.
That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.
Comments not found